Eagle errors

[Nathan Brackett]

Hello I'm designing a circuit in eagle.  After changing pad size and hole size of a part I'm getting drill distance and dimension error in DNC.  It could very well be I've messed up in editing the part.  Any suggestions would be appreciated. Im trying to attach images for referance.

--
To view any images and attachments in this post, visit:
https://www.element14.com/community/message/245964

Attachments:
15389143999062813427369760236784.jpg
15389144219718643785434581814115.jpg
15389144503031901380195758480667.jpg

[Rob Pearce]

Post by Nathan Brackett
Hello I'm designing a circuit in eagle.  After changing pad size and hole size of a part I'm getting drill distance and dimension error in DNC.  It could very well be I've messed up in editing the part.  Any suggestions would be appreciated. Im trying to attach images for referance.

That looks like you've put a hole and a pad in the same place. Don't do
that. A PTH pad already makes a hole in the board. Only place a "hole"
when you need a non-PTH hole, such as a mounting lug or an orientation plip.